DI000969 DA

ID of the data area

DI041421 DT

ID of the data table of the data area

Details

  • In the standard, this field is customized to be a link in the Modules module. When clicking on the link, the respective data table in the Data Dictionary module is opened.

DI041305 Data area

In this field, the data area name is displayed which is entered in the Data areas data field in the Data Areas module. If this data field is empty, the data table name of the DDI will be displayed.

DI000822 UF MOD/DA

Use frequency of the data area. Shows the number of modules in which the data area appears. The respective field is labeled with the abbreviation UF on the interface.

Details

  • If the data area is used in more than one module, the yellow traffic light is displayed in the field.
  • In the standard, this field is customized to be a link in the Modules module. When clicking on the number, the Data Area Use module is opened, in which all modules to which the data area is assigned, are listed.

Note

  • Changes in one data area are effective in all modules to which this data area is assigned.

DI001587 Never show

Values

  • : The data area is never displayed in the module.
  • : The data area is displayed in accordance with the Display field and can be unhidden and hidden by the user.

Details

  • This parameter is used if a data area is required due to the desired display but is to be invisible at the same time.
  • Data in this data area is also loaded when filtering in a module. Therefore, reasonable filter criteria must be set in this data area as well.

Note

  • Dynamic hiding of a data area with Never show via module variants and Python macros is not supported for data areas the sub-data areas of which use Never show = in particular.

DI001581 Create

Values

  • : Data can be created in this data area.
  • : No data can be created in this data area. Only existing data can be viewed or changed.

Notes

  • Either Create or Output can be activated.
  • If the Create parameter
    • is activated, Insert will be activated automatically as well.
    • is deactivated, Insert will be deactivated automatically as well.
  • Conversely, the Insert parameter does not influence the Create parameter.
    • I.e. a parameter can be set to Create = N but Insert = Y if, e.g., a record for selecting existing values from the listbox is to be inserted without a record with completely new values being created.

DI059051 Insert

Via this parameter, insertion can be activated or deactivated via the Insert and Insert subordinate area menu items and via the Insert context menu.

Values

  • : Insertion is permitted in this data area
  • : Insertion is not permitted in this data area

Details

  • If the parameter is deactivated in a data area, the insertion of a coequal record will not be permitted in this area.
  • If the data area in question has children (subareas),
    • for which the Insert parameter is deactivated as well,
      • it will not be possible to insert child records from the parent record.
    • for which the Insert parameter is activated,
      • it will not be possible to insert child records.
    • of which some have the Insert parameter activated and others have it deactivated,
      • inserting child records from the parent record is only possible for records, for the area of which the parameter is activated.

Note

  • If the Create parameter
    • is activated, Insert will be activated automatically as well.
    • is deactivated, Insert will be deactivated automatically as well.
  • Conversely, the Insert parameter does not influence the Create parameter.
    • I.e. a parameter can be set to Create = N but Insert = Y if, e.g., a record for selecting existing values from the listbox is to be inserted without a record with completely new values being created.
  • If the Output parameter is activated, insertion is not possible.

DI000798 Delete

Values

  • : Deletion is permitted in this area, unless the Output parameter is activated.
  • : The data in this data area cannot be deleted; the attempt is rejected with a corresponding message.

DI028202 Display

Here, you can define whether and how a data area is displayed

Values:

  • 0: Do not display
    • The data area is not displayed when the module is opened but it can be unhidden and hidden again.
  • 1: Display
    • The data area is displayed when the module is opened and can be unhidden and hidden again.
  • 2: Fixed with parent area
    • The data area is always displayed with its parent area and cannot be hidden if its parent task is visible.
  • 3: Always display (cannot be closed)

DI001578 Indent

Horizontal indent. Refers to the left margin of the parent area, or, for the parent data area, to the left margin of the window.

Values

  • Specified in tenths of a millimeter.
  • Negative values cause an outdent.

Notes

  • In which window the indention is displayed, is defined in the Tree field.
    • If the Tree parameter = 0/empty, the indention is displayed in the left window (usually in window 1).
  • For a binding margin, an indentation of at least 60 is required when the zoom setting is 100 %.

DI006893 Tree

This parameter is used to set whether the data area assignment possesses a tree structure; and if so, in which window it is to be found.

Values

  • 0: Tree structure is not displayed
  • 1: Display of tree structure in window 1
  • 2: Display of tree structure in window 2
  • 3: Display of tree structure in window 3

Note

DI001580 Below one another

Option for aligning the records

Values

  • : the records are displayed below one another.
  • : the records are displayed next to one another.

Example: Below one another activated:

Example: Below one another deactivated:

Note

  • For alignment of the data fields within a record, the Layout parameter in the Data Areas module is used within the respective data area.

DI028203 Positioning

Defines the alignment (top, center, bottom) of the data area within a module. Caution: do not confuse with the Pos. parameter which determines the order of the data areas within a module.

Values

  • 0: center
    • If there are data areas with Position = 1 or 2, data areas with Position = 0 are displayed between them.
  • 1: fixed at the top
    • The data area is fixed at the top of the module, i.e. it is not scrolled.
  • 2: fixed at the bottom
    • The data area is fixed at the bottom of the module, i.e. it is not scrolled.
  • 3: print area: header
  • 4: print area: footer

Note

  • The order "top (Position = 1) -> center (Position = 0) -> bottom (Position =2)" must be complied with when allocating the positions.
    • This also applies to parent areas with Never show =

Schematic examples

Examples of application: a module with:

  • scale area
    • project area
      • task area
  • If the project is to be displayed fixed at the top, both project and scale area must have Position = 1.
  • If the scale has Position = 0, scale and tasks will be displayed, projects will not be displayed.

On Position = 1:

  • For data areas with Position = 1 with dependent data areas you have to consider the following:
    • If the parent data area is defined as a fixed area and more than one record is displayed in it, the data logical relation to the child data area is no longer visible. 
      • E.g.: parent: 461 (Project), child: 463 (Task):
        • If several projects are displayed in the fixed area, you can no longer identify which tasks belong to which projects.
    • If a record in the fixed area has child records in the mid-section,
      • and the record is marked in the fixed area, the child data will not be marked.
      • It is not possible to hide direct child records.

DI001579 Heading

This parameter controls whether the ordinary heading is displayed.

Values

  • : The ordinary heading is displayed for each record directly above the record depending on the area change for each first record.
  • : The ordinary heading is not displayed.

Notes

  • The font symbol of ordinary headings is defined in the Skins user interface in the Symb. heading data field.
  • For data areas with Layout = 2, this parameter does not take effect. If necessary, the field names are assigned manually in the layout.
  • If Below one another = , the column width will be determined from the maximum DF length and the length of the DI name.

DI001584 Fixed heading

In the fixed heading, there are the names of the data fields. In contrast to the ordinary heading it is only displayed once at the top window margin and remains there when scrolling vertically.

Values

  • : The fixed heading is displayed.
  • : The fixed heading is not displayed.

Notes

  • The font symbol of ordinary headings is defined in the Skins user interface in the Symb. fixed heading data field.
  • For data areas with Layout = 2, this parameter does not take effect.
  • For scale areas, Fixed heading means that the scale does not move when the user scrolls vertically.
  • On printed outputs, the Fixed heading is repeated on each new page.
  • If a data area is parameterized with Fixed heading = and Next to parent area. = ,
    • the fixed heading will be displayed below any heading of the parent area, if there is one, in the position where the data area would be positioned if there was no Next to parent area parameter = .
    • the fixed heading will not be displayed above the data fields of the data area.

DI001782 Next to parent area

Display option for the position of an area relative to its parent area

Values

  • : the area will be displayed below its parent area.
  • : the area will be shown next to its parent area.

Example module construction

  • Project data area
    • Project note data area: Beside parent area. =

Result:

Project 4711

Note1

Note2

Project 4811

Note1

Project 5000

Note1

Example module construction

  • Project data area
    • Project note data area: Beside parent area. =

Result:

Project 4711

Note1


Note2

Project 4811

Note1

Project 5000

Note1

Notes

  • If an area is displayed next to its parent area, the parameters for the headings (Heading and Fixed heading) should be the same, otherwise, horizontal deviations may occur.
  • Depending on the design, layout problems cannot always be avoided.

DI024599 Fulfillment rule

Here, the rule for Fulfillment is defined by entering the operands (data areas) with the available operators. The fulfillment rule only takes effect if the Fulfillment is activated.

Information

DI001582 Fulfillment

Here you can determine whether the fulfillment rule which was defined in the Fulfillment rule data field takes effect.

Information

Values

  • : The fulfillment rule takes effect.
  • : The fulfillment rule does not take effect.

DI000982 Pos.

This DI defines the order in which the data areas in a module are arranged. It serves, along with the Parent area parameter, to structure the data areas in the module.

Example

  • 1 = Project
    • 2 = Project note
    • 3 = Task
      • 4 = Task note

Note

  • The position must be unique within the module.
See also: Module Workflow Level 1

DI001783 Parent area

This parameter serves, along with the Pos. parameter, to structure the data areas in the module. Here, the parent data area is defined for a data area by entering the Pos. number of the latter. For an area without parent area, no entry is made here.

Example

  • Project: Position = 1 Parent area = empty
    • Project note: Position = 2 Parent area = 1: Project note is appended below project, and is displayed directly below it.
    • Task: Position = 3 Parent area = 1: Task is appended below project, and is displayed after the PR notes
      • Task note: Position = 4 Parent area = 3: Task note is appended below task, and is shown directly below it.

Notes

  • Specification of the parent area determines how the module searches the database for the data.
  • Via Pos. and Parent area, only related data areas can be connected. If there is no relation between the respective data tables, or if an alternative relation is to be defined, it can be created in the Relation to parent area data field.
    • Exception: For groupings, the parent area stems from the same data table.
    • If data areas are connected via Pos. and Parent area data areas which are not related (neither in the data table nor in the module), only incorrect data or no data at all is found.
See also: Module Workflow Level 1

DI001793 Recursive child area

When you customize recursion relations (structures), the position of the subarea which defines the recursion will be displayed here.

DI040991 Raw format

Values:

  • : In addition to their formatted display, numeric values are also sent to the client unformatted. This parameter must be activated in relation to the charts (visifire).
  • : Numeric values are only sent to the client formatted.

DI027097 Scale y-axis

DI040867 Relation to parent area

With the help of this parameter, a relation can be created for data from different data tables that are not interconnected relationally (in the data table, no relation exists).

Relations are specified as follows:

  • [Relation type] [DI tupel]
    • [Relation type] = "N:1" | "1:N"
    • [DI tuple] = "," [DI from DT of the current data area] ":" [DI from DT of the parent area] ([DI tuple])

Schematic example

  • For the following module construction, the record of a symbol (DT424) is to be displayed below a data field (DT411):
    • DT411
      • DT424
  • For this purpose, the following entry is made in the Relation to parent area data field: N:1,DI000636:DI000234
    • DI000636: Symbol (symbol ID from DT424)
    • DI000234: Symbol ID (DT411)

Customizing Example in Module Workflow Level 2

Rule

  • Relations are only supported if they are of the same data type.

DI040868 Relation to recursive child area

DI000157 Output

Either Create or Output can be activated.

Values

  • : All data fields of the data area become output fields (independent of the DF behavior), i.e., editing is not possible. It then also becomes impossible to delete or create records in this data area.
  • : When editing, the data fields of this data area behave in accordance with the DF behavior. Deletion and creation are then dependent on the other assignment parameters.

DI000915 Area under bar

This is used to define whether the fields of a child area are to be displayed under a bar of the parent area. Furthermore, the fields in Window 3 which are to be displayed below a bar are to be defined in this area. It is recommendable not to have too many fields displayed here.

Example

Customizing:

  • Project Position = 1 Parent area = 0
    • Task Position = 2 Parent area = 1 with bar
      • TA note Position = 3 Parent area = 2 area under bar

Result:

Window 1:Scale
Project
TA===========(bar)

TA note

DI001585 Scale

For time scales:

  • Width of a day in tenths of a millimeter

Example

  • On a weekly scale, the output is to be scaled to a length of 21 mm for each week.
    • Calculation = 21 millimeters / 7 days = 0.3mm
    • Hence Scale = 30 (0,3mm)

For histogram scales:

  • For Grid = 0:
    • Scale specifies the total height of the histogram in tenths of a millimeter.
  • For Grid > 0:
    • Scale specifies how many tenths of a millimeter are displayed from the Grid data field per grid unit.

Example

  • Scale = 100, Grid  = 40. 40 units cover 100 tenths of a millimeter, i.e. 40 hours are 1 cm long (however, this does not mean that there is a scale mark every 40 hours since the scale division is defined by the Grid from DT411).

DI001586 Grid

Used to influence the measure of histogram scales. Takes effect in combination with Scale.

DI001583 Page break

Controls PB (page break) when printing, depending on the area changes for the data

Values

  • 0: No page break when there is an area change, but only when necessary.
  • 1: Each line/record of the area is displayed on a new page.

Example (Page break = 1 for project):

    • Project 1
    • Tasks
    • Page break
    • Project 2
    • Tasks
    • Page break
    • Project 3
    • Tasks
    • Page break
    • ...
  • 2: Each line/record of the area is displayed on a new page if there is a (parent) area change, e.g., if you want the project to be displayed on the first and all tasks to be displayed from page 2 up to page n.

Example (Page break = 2 for task):

    • Project
    • Page break (because Page break = 2 for task)
    • Task 1
    • Task 2
    • Project
    • Page break
    • Task 1
    • Task 2
    • ...
  • 3: Each line/record of the area is displayed on a new page if there is no (parent) area change.

Example (Page break = 3 for task):

    • Project
    • Task
    • Page break
    • Task
    • Page break
    • Task
    • ...
  • 4: Each line/record of the area is displayed on a new page with its child records, if they do not all fit on the current page.

Example (Page break = 4 for project):

    • Project 1
    • Tasks
    • Project 2
    • Tasks
    • Page break (because project 3 with its tasks does not fit on the current page)
    • Project 3
    • Tasks
    • Page break (because project 4 with its tasks does not fit on the current page)
    • Project 4
    • Tasks
    • ...

DI009341 Move

For each assigned data area you can specify whether it is possible to move records in this module.

Values

  • : Moving is possible (default)
  • : Moving is not possible

Note

  • If the Output parameter is activated, moving is not possible.

DI022705 Print settings

Printing control for fixed data areas

Values

  • 0: Normal
    • Position = 1: Print once on first page fixed at the top
    • Position = 2: Print once on last page fixed at the end
  • 1: Print on each page
    • Position = 1: Reprint on every page fixed at the top of the sheet
    • Position = 2: Reprint on every page fixed at the bottom of the sheet
  • 9: No printout

DI022734 Highlight

Values:

  • : When clicking on a data field, the corresponding record is highlighted with the color stored in the Highlighting color data field.
  • : When clicking in a data field, the record is not highlighted with a color.

Note

  • When assigning a new data area, this parameter is activated by default. The parameter is hidden in the Modules module (F9) and must be unhidden if necessary.

DI025640 Open to level

This parameter defines how many levels are expanded when opening a module.

Note

  • Here, only values >= 0 can be entered. Otherwise, the Please check input message will be displayed in the status line.

DI028118 No window separator

DI065881 Display filter

Number of data fields with Filter from or Filter to entries in the respective data area

DI065882 Display Regex

Number of data fields with Regular expression entries in the respective data area